UL3530 XL-PE ngocingo UL Hook Up ngcingo XLPE Ubushushu obuphezulu150℃ okanye 200℃ I-Voltage600volts

IDATHA YOBUGCISA:

Umqhubi: 26 AWG - 750 kcmil.I-Tinned, i-annealed, i-stranded okanye i-conductor yobhedu eqinile.Ukufakwa kweRubber yeSilicone.Iqondo lobushushu elilinganisiweyo: 150℃ OKANYE 200℃.Ixabiso lombane: 600volts.Ubukhulu obufanayo bocingo ukuze kuqinisekiswe ukuhluba nokusika lula.

QHAGAMSHELANA NGOKU Khuphela kwiPDF

Iinkcukacha zeMveliso

Iithegi zeMveliso

UL3530 HOOK-UP WIRE

Inombolo yefayile: E214500

IIDATHA ZOBUGCISA

-- Umqhubi: 26 AWG - 750 kcmil.

-- Ikhondaktha yekopolo enkonkxiweyo, ene-annelled, ebotshiweyo okanye eqinileyo.

-- Ukufakwa kweRubber yeSilicone.

-- Iqondo lobushushu: 150℃ OKANYE 200℃.Ixabiso lombane: 600volts.

-- Ubungqingqwa obufanayo bocingo ukuqinisekisa ukuhlubula nokusika lula.

-- Upase i-UL VW-1&CUL FT1 yovavanyo oluthe nkqo lwedangatye.

-- Faka isicelo kwisixhobo soMkhaya, ukukhanya kunye nokuKhanya, iMetallurgy& nesibane sentloko, oomatshini bombane, isivamvo sexeshana, uthotho lomkhosi, uthotho lweMichiza yeMetallurgy, iiMoto neeNqanawe, ufakelo loMbane.

Isimbo se-UL & Uhlobo lweCul	Umqhubi		I-Insulation Ukutyeba	Kukonke I-Dimeter	Yima iFaka-up		Umqhubi Ukuxhathisa kwi-20 ℃
	AWG	Ukwakhiwa	I-Insulation Ukutyeba	Kukonke I-Dimeter	Yima iFaka-up		Umqhubi Ukuxhathisa kwi-20 ℃
	AWG	Hayi/mm	mm	mm	Ft/coil	M/Ikhoyili	Ω/KM
UL3530 (Ibambekile)	26	7/0.16	0.76	2.02	2000	610	150
	24	7/0.20	0.76	2.17	2000	610	94.2
	24	11/0.16	0.76	2.17	2000	610	94.2
	22	7/0.25	0.76	2.36	2000	610	59.4
	22	17/0.16	0.76	2.36	2000	610	59.4
	20	7/0.31	0.76	2.48	2000	610	36.70
	20	21/0.178	0.76	2.48	2000	610	36.70
	18	7/0.39	0.76	2.75	2000	610	23.20
	18	34/0.178	0.76	2.75	2000	610	23.20
	16	7/0.5	0.76	3.09	1000	305	14.60
	16	26/0.25	0.76	3.09	1000	305	14.60
	14	37/0.26	0.76	3.44	1000	305	8.96
	14	41/0.25	0.76	3.44	1000	305	8.96
	12	45/0.32	0.76	4.00	1000	305	5.64
	12	65/0.25	0.76	4.00	1000	305	5.64
UL3530 (Oluqilima)	26	1/0.40	0.76	2.02	2000	610	140
	24	1/0.51	0.76	2.17	2000	610	87.5
	22	1/0.64	0.76	2.36	2000	610	55.0
	20	1/0.81	0.76	2.48	2000	610	34.6
	18	1/1.02	0.76	2.75	2000	610	21.8
	16	1/1.29	0.76	3.09	1000	305	13.7
	14	1/1.63	0.76	3.44	1000	305	8.62
	12	1/2.05	0.76	4.00	1000	305	5.43